8.3.2 Removing and replacing a magazine using the OCPCAUTION: The magazine must only be removed manually in an emergency. Failure to follow normalprocedure can cause data loss and equipment damage.The magazines should be released using the Operator Control Panel (OCP) or the RemoteManagement Unit (RMU). Recommends that you release the magazine using the OCP or RMU,however, if the OCP process fails, or if the magazine needs to be removed when the power to the tapelibrary is off, you can manually release the magazines.This OCP option lets you gain access to the left and right magazine. Access to the magazinesrequires the use of the Administrative password.To remove a magazine:1. From the Home screen, press Previous or Next on the OCP until the screen displaysOperations.2. Press Enter to select.3. Press Previous or Next until the screen displays either Unlock Left Magazine, or UnlockRight Magazine.4. Press Enter to select the desired magazine to unlock.5. Enter the Administrative password if requested.6. The display will read Left Magazine Unlocked, or Right Magazine Unlocked.7. Pull the released magazine out of the library.8. The screen will now display Insert Left Magazine, or Insert Right Magazine. The librarycannot perform any other operation until the magazine is replaced. After exchanging tapesin a magazine, slide the magazine completely into the library. The magazine will lock intoplace once it is correctly installed and the library will inventory the magazine.
