ActionTec GT704-WG User Manual

Also see for GT704-WG: User manual Specifications User manual Troubleshooting

Contents

ActionTec GT704-WG User Manual Manual pdf 41 page image

38Actiontec 54 Mbps Wireless DSL Gateway User Manual4. In the next screen, read the recommendations. To perform an advanced setupon the Gateway, click Begin Advanced Setup.5. The “Configuring the Advanced Settings” screen appears. To check all the set-tings, or if unsure of which settings to modify, select Next. To modify a spe-cific configuration, click on its name in the menu bar on the left.☞ Note: To save changes made in any of the Advanced Setupscreens, click Save and Restart at the bottom of the gray menuon the left side of the screen.WAN IP AddressSelecting WAN IP Address in the “Configuring the Advanced Settings” screen gen-erates the “WAN IP Address” screen. WAN IP Address allows manual set up of theIP address of the Gateway. There are five ways to do this: Transparent Bridging,Obtain an IP Address through PPPoE, Obtain an IP Address Through PPPoA,Obtain an IP Address through DHCP, and Specify a Static IP Address.☞ Note: If unsure about which connection is present, check withthe Internet Service Provider (ISP) before continuing.