ActionTec GT704WG User Manual

Also see for GT704-WG: User manual User manual Specifications Troubleshooting

Contents

ActionTec GT704WG User Manual Manual pdf 26 page image

21Chapter 5 Configuring Wireless SettingsBasic Wireless SetupTo perform a basic setup of a wireless network using the Gateway:1. In the “Wireless Basic Settings” screen, turn the Gateway’s wireless radio on byselecting On.2. Create a name for the wireless network and enter it in the “ESSID” text box.3. Select a channel from the “Channel” drop-down menu. In the United States,use channels 1-11.4. Activate WEP (Wired Equivalent Privacy) to secure the wireless network byselecting WEP.5. Create a 64-bit WEP key by selecting 64-bit WEP Key from the “select a WEPKey” drop-down menu, then entering a 10-digit key in the “Key Code” textbox. The digits can be any letter from A-F, and any number from 0-9.6. Write down the Gateway’s wireless settings. To connect other devices to thewireless network, the devices’ wireless settings must match the Gateway’s wire-less settings exactly. Check the “Current Wireless Status” box (available in anywireless setting screen) to view the Gateway’s wireless status and settings.Wireless Advanced SettingsTo access the Gateway’s wireless advanced settings screens, select AdvancedSettings from the menu on the left side of the “Wireless Basic Settings” screen.Downloaded from www.Manualslib.com manuals search engine