10Actiontec Network Attached Storage Device User Manual☞ Note: If the USB device is not removed, it will not be re-con-nected. The USB device must be removed and re-inserted to re-connect.Adding a Print ServerIf a USB printer is connected to the NAS Device, the Device can be used as a printserver. To do this, follow these instructions (this installation is for Windows XPonly; other operating systems may have a slightly different procedure):1. Plug a USB printer in the USB port on the rear panel of the NAS Device.2. From the desktop of the computer, select Start, then Printers.

user manual

Introduction

Package Contents

Configuring the NAS Device

mapping a network drive

Accessing the NAS Device from the Web

Changing the Password

USB Devices

Adding a Print Server

Other Configurations

Using the Administrative Utility

Users

System Status

Network Settings

System Settings

Advanced Setup

data backup

Accessing the NAS Device on the Internet

Using the Web Browser from the Internet

Troubleshooting

Notices

Miscellaneous Legal Notices

Limited Warranty

ActionTec NS-100 User Manual

NS-100

NS100-160

NS100-200

NS100-250

NS100-300

NS100-400