Activeforever KA1000 Instruction Manual
                 | |
- 13 -Note: * Turn on the table lamp from the light switch on the extended receiver. Leave the switch on thelamp in the ON position or it will not flash the light.* The alarm function of the alarm clock KA1000 will not trigger the extended receiver.* The extended receiver is on stand-alone unit and receives signals directly from a transmitter. Itdoes not need a KA1000 clock to operate.* If you use any transmitter with fire alarm, smoke alarm or weather alert radio, you must test thosetransmitters every month to make sure that it is functioning properly.* Press the light switch once to reset any alarms triggered.* The LED on the extended receiver will flash to indicate the battery is low on the correspondingtransmitter. Press the light switch to reset the low battery indicator.B. Door knock transmitter (KA1000DK) and Doorbell Transmitter (KA1000DB):Hook the door knock KA1000DK on top of the door (the hook is included). Turn on thepower switch and knock on the door to test the operation. The battery is designed to last for1 year. If the red LED is weak or turns off, replace with CR2032 battery. Each door knockneeds to be registered to the clock KA1000 or the extended receiver KA1000EX.Clip the doorbell (KA1000DB) next to the doorknob facing out. Press on doorbell button to test..C. Telephone ringer transmitter (KA1000TR):Turn on the Telephone Ringer Transmitter then register with your clock KA1000 orextended receiver KA1000EX (refer to the above sections for how to register a transmitterwith KA1000 and KA1000EX.) Plug the telephone ringer transmitter into the telephoneoutlet and turn on. Press the test button on the transmitter. If the red LED lights up and thesignal received by the clock or extended receiver, the system operates perfectly.D. Tactile telephone ringer pager (KA1000PG):This product is designed for a deaf blind user. The others also enjoy a silent notificationfrom the tactile pager when the telephone rings. The package called TRS100 comes witha pager, a telephone ring signaler, rechargeable battery, and charger. Plug the telephonetransmitter KA1000TR to the telephone outlet. Turn it on. Charge the KA1000PG for atleast 8 hours. Turn on the pager. Press test the button on the transmitter, the pager willvibrate to ensure the system works. Always charge the pager every night.E. Nursery Room Call Transmitter (KA1000NR):Place this transmitter near your baby and adjust the sensitivity to the baby sound. It willsend the signal to the clock or extended receiver when the baby cries.F. Fire/Smoke/Carbon Mono Oxide Alarm transmitter (KA300TX-1)KA1000 system will give you the opportunity to link allalarm systems in your house together by using thewireless transmitter KA300TX-1. Select a channel for adifferent sensor and record it on the KA300RX-1 receiverlabel. Make sure that they have the same house code. In-stall this transmitter on a fire, smoke, or carbon monoxidealarm and turn it on. The vibration of the loud siren willactivate the transmitter. The clock KA1000 will displaythe channel when the alarm is activated. You must test thesystem every month to make sure the system is workingproperly. The battery is designed to work continuously for1 year. Use the CR2032 lithium battery to replace.Press on test buttonof fire alarm to testthe systemKA300TXTurn on afterinstall on thealarm device |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine