AcuRite 01120M Instruction Manual

11Programmable AlarmsThis display features programmable alarms that sound an alert to notify youwhen a value (for temperature or humidity) has been reached or exceeded.When an alarm is triggered, the display emits an audible beep and flashes datain the affected category. You can customize the alarms by turning ON or OFFthe alarms you’d like activated or deactivated, and by inputting your own valuesto trigger the alarm.Setup an Alarm1. Press and release the “ ” button until the reading for which you wish toset an alarm is shown on the display. “ ” will be shown.2. Press and release the “ “ or “ “ buttons until “ ” appears.3. Press and release the “SET” button. The current HIGH alarm value will beshown.4. Press and release the “ “ or “ “ buttons to adjust the alarm’s HIGH value.5. Press and release the “SET” button. The current LOW alarm value will beshown.6. Press and release the “ “ or “ “ buttons to adjust the alarm’s LOW value.7. Press and release the “SET” button to end alarm adjustments, OR pressand release the “ ” button to adjust the next alarm’s values.Disable an Alarm1. Press and release the “ ” button until the reading for which you wish todisable an alarm is shown on the display. “ ” will be shown.2. Press and release the“ “ or “ “ buttons until “ ” appears.3. Press and release the “ ” button to cycle to the next reading.4. Repeat steps 1-3, as needed.Note: To disable ALL alarms at once, press and HOLD the “ ” button for10 seconds.You will automatically exit alarm SET MODE if no buttons are pressed for10 seconds. Enter alarm SET MODE at any time by pressing the “ ” button.