10Placement for Maximum AccuracyAcuRite sensors are sensitive to surrounding environmental conditions. Properplacement of both the display unit and outdoor sensor are critical to theaccuracy and performance of this product.Display Unit PlacementPlace display unit in a dry area free of dirt and dust. Displaystands upright for tabletop use or is wall-mountable. For wallmounting, hang using the keyhole located on back of the unit.Outdoor Sensor PlacementSensor must be placed outside to observe outdoor conditions. Sensoris water resistant and is designed for general outdoor use, however,to extend its life place the sensor in an area protected from directweather elements.Hang the sensor using the integrated hang holes or hanger, or byusing string (not included) to hang it from a suitable location, like awell covered tree branch. The best location is 4 to 8 feet above theground with permanent shade and plenty of fresh air to circulatearound the sensor.Important Placement Guidelines• To ensure accurate temperature measurement, place units out of directsunlight and away from any heat sources or vents.• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.• To maximize wireless range, place units away from large metallic items, thickwalls, metal surfaces, or other objects that may limit wireless communication.• To prevent wireless interference, place both units at least 3 ft (.9 m) awayfrom electronic devices (TV, computer, microwave, radio, etc.).TV 3(100 meters)(330 feet maximum)(.91 m)ATLEASTAPARTSetup is CompleteThe sensor will now synchronize with the display unit. It may take a fewminutes for synchronization to complete. NOTE: It will take up to 4 hours togenerate a weather forecast after initial setup.