AcuRite 614 Instruction Manual
               | |
Contents | 
A B CBatteryCompartmentCoverThis wireless rain gaugeuses long range 433mhzradio frequency forcommunication.In the event that you havereception problems due tointerference, both the mainunit and the wireless raincollector have a selectablewireless ID. The ID switchesare located within thebattery compartments ofthe main unit and thewireless rain collector.You may choose A, B or C;but both the main units’ andthe wireless rain collectors’IDs must match forsuccessful synchronization.Set Wireless IDboth wireless ID’smust matchMeasurement RangesRainfallAccumulative Rainfall Range: 0 to 99.99 inches ( 0 to 2540 mm )SpecificationsRain Gauge General SpecificationsRainfall Resolution: 0.02 inchesRainfall Units: Inches (in) and millimeters (mm)Wireless Rain Collector: automatic self emptying, continuous rainfall measuringPower RequirementsMain Unit: 3 x “AA” alkaline or lithium batteriesWireless Rain Collector: 2 x “AA” alkaline or lithium batteriesWireless CommunicationRadio Frequency: 433 mhzTransmission Intervals: every 16 seconds6 • PRODUCT SPECIFICATIONSA B C A B CTroubleshootingProblemBad Rain CollectorReceptionRelocate the main unit and/or the wirelessrain collector closer together. Both units mustbe within 100 feet from each other. Make sureboth units are placed at least 3 feet from otherelectronic appliances and devices that mayinterfere with the wireless communication(such as TV’s, microwaves, computers etc.).NOTE: It may take up to 20 minutes for themain unit to re-synchronize with the sensorwhen batteries are replaced.Main UnitDisplay Not WorkingMake certain that the batteries are installedcorrectly. The batteries may need replacing.No Rain DataRecorded On Main Unit(no communication)If wireless reception is bad (no bars), see“Bad Reception” section above. The wirelessID setting on each unit must match for bothunits to communicate properly. See “SetWireless ID” on the next page.Possible Solutionno barsSuspected RainMeasurementInaccuracyIf you suspect the rainfall measurement isnot accurate, make certain the rain collectorbatteries are fresh.Check that the collector is mounted to alevel surface and that no foreign debris orplant matter is preventing the flow of rainfallinto the collector. See “Care Instructions.”Make certain that the internal tipping bucketis allowed to move freely and is not obstructedby any foreign objects or debris.Product RegistrationTo receive product information, registeryour product online. It’s quick and easy!Log on to http://www.chaneyinstrument.com/product_reg.htm- 9 -- 8 - |
manualsdatabase
Your AI-powered manual search engine