AcuraGlobal Wavetrend L-A210 User Manual
                                    | |
Contents
| 
ACURA’sRX210 User Manual Page 30 of 35Set InfoThe serial readers are part of the larger ACURA’s Reader family, some of whichinclude GPS. In order to harmonize the software interface between the serial readersand the GPS enabled units RX910, RX1010, RX1310 the command allows the userto set the following fields1) Latitude ( 4 bytes )2) Longitude (4bytes)3) User Data (10 bytes)0xAA 0x12 Network ID Reader ID Node ID 0xF0 Data ChecksumData (18 bytes): Location: Latitude – 4 bytesLongitude – 4 bytesUser Data: 10 bytesResponse0x55 0x00 Network ID Reader ID Node ID 0xF0 ChecksumGet InfoReturns the Set Info settings as well as the following valuesModel number (1 byte): 1= L-A210, 2 =L-A211, 3 = L-A202Reader serial number (4bytes)Location: Latitude (4bytes), Longitude (4bytes)User Data (10bytes)0xAA 0x00 Network ID Reader ID Node ID 0xF1 ChecksumResponse0x55 0x17 Network ID Reader ID Node ID 0xF1 Data ChecksumData (57 bytes): Model number:(1 byte): 1= L-A210, 2 =L-A211, 3 = L-A202Status:bit 0: Not usedbit 1: Not usedbit 2: Autopol settingbit 3: Gain settingbit 4: Not usedbit 5: Not usedbit 6: RS232 enable settingbit 7: Not usedSerial number (4 bytes) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine