Adam A3X Operation Manual

Also see for A3X: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Adam A3X Operation Manual Manual pdf 7 page image

7AX Manual / english3.1 Basic active speaker connectionFor the basic active speaker connection,please use mono XLR or RCA cables. In mostprofessional applications XLR will be the bestchoice, while RCA is more common in HiFiapplications. Each one of the two loudspeakershas to be connected to one channel of thesound source.3.2 The Stereo Link (A3X and A5X only)If you wish to use the Stereo Link that allows adjustment of the volume of bothloudspeakers with a single master control, please proceed as follows:a) First, connect Speaker 1 (that is supposed to control the overall volume) to yourpreamplifier, sound source, etc. by using one stereo or two mono RCA leads.Please note that the Stereo Link does not work with XLR.When connecting your speakers via RCA please make sure the white (or black) RCAplug which leads the left stereo channel is connected to the “Unbalanced In” andthe red RCA plug (that leads the right stereo channel) is connected to the “StereoLink Input” of the left speaker, if this is the master speaker you want to control theoverall volume with.If the right speaker shall be the master please connect the red RCA plug (the rightstereo channel) to the “Unbalanced In” and the white (or black) RCA plug for theleft stereo channel to the “Stereo Link Input” of the right speaker.b) Secondly, connect the “Stereo Link Output” of Speaker 1 to the “Unbalanced In” ofSpeaker 2 by using the provided (or another) mono RCA cable.Please note:On the front side of the unit functioning as master, a correspondingwhite LED will illuminate as soon as a mono RCA plug is connected to theStereo Link output.Unlike the common ‘master-slave-configuration’, any A3X or A5X that is connectedaccordingly can function as either a master or a slave unit.For an equal volume level of both speakers please make sure thatthe volume knob of speaker 2 is snapped in the middle position.3. Connecting the Speakers2 x RCAor2 x XLRSpeaker 1 Speaker 2TWEETER LEVELA5XLOW SHELFHIGH SHELFOUTPUTSTEREOLINKINPUTUNBALANCED INBALANCED INCONTROLSIN-/ OUTPUTS0-6 dB +6 dB0-6 dB +6 dB0-4 dB +4 dBSerial No.T1.6AL (230V~,50Hz)T3AL (115V~,60Hz)130WATTSTWEETER LEVELA5XLOW SHELFHIGH SHELFOUTPUTSTEREOLINKINPUTUNBALANCED INBALANCED INCONTROLSIN-/ OUTPUTS0-6 dB +6 dB0-6 dB +6 dB0-4 dB +4 dBSerial No.T1.6AL (230V~,5T3AL (115V~,60130WATTSLED