Adam Eco4 Installation & User Manual

Adam Eco4 Installation & User Manual Manual pdf 27 page image

Now place the last two coalsA in the two centre spacesas shown.2 7 S E C T I O N 0 9FITTING THE DECORATIVE FRAMEThe appliance is supplied with a decorative frame, the frame attaches to the fireboxas a three piece or one piece clip-on unit.Place the magnets supplied to the outer frame of the fire box.A plastic protective coating may be applied to the face of the frame assembly, whichshould be removed at this stage; the one piece unit can be placed in position.With the three piece unit you should start with the side pieces of the clip-on assembly,these should be pushed into position first, followed by the top bar, which shouldoverlap the sides.IMPORTANT NOTE: Due to the possibility of sharp edges, care should be taken whenhandling the three piece frame components, the use of protective gloves isrecommended.Place the fire front/ fret into position in front of the fire and slide the ashpan door intoplace. The fire front/fret shown in these instructions may differ from the one suppliedwith the appliance, we strongly recommend you use a fire front/fret supplied by Adamfires as these products will have been tested with the appliance, although other firefront/frets will be compatible.COMMISSIONING THE APPLIANCETurn on and test the gas supply up to the fire for any leaks, in accordance with currentApproved Codes of Practice (ACOPs)OPERATING THE APPLIANCE(See Section 18 Users Instructions)