Adam S5VA Operation Manual
                        | |
4Quick Start• After having unpacked your monitor, please allow the system to acclimate to thetemperature of the room. Please do not connect the speaker for approximately anhour.• Now, check the voltage setting (2). It has to conform with the voltage standard of thecountry you stay. Please, contact ADAM Audio, should this not be the case.• Make sure the power switch at the back of the unit is turned off as well as the switchon the front of the monitor.• Connect the provided power cord to the speaker.• Decrease the volume of your audio system to protect your speaker and ears fromdamage when switching the system on.• Connect the XLR-Input (1) of the speaker to the output of your audio system.• Switch on the rear power switch first, then the front switch. By increasing the volumeof your audio system, you should now hear sound.• To achieve the best possible sound reproduction, please see the following consider-ations for speaker placement.(1) (2) |
Related manuals for Adam S5VA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine