Adam S6A Mk2 Operation Manual
              | |
41. Quick StartImportant information for set upAcclimation: After having unpacked your loudspeaker, please allow the sys-tem to acclimate to the temperature of the room. Please do not connect thespeaker for approximately an hour.HQ Cabling: We recommend using high quality cables to guarantee optimalperformance.Solid stand: It is important to ensure the speakers stand firmly on a solidground (if they are not wall-mounted)!Package: We recommend not to damage the package and to retain it. Theoriginal packaging is the best guarantee for safe transportation (see 7.).Break-in time: Please note that the loudspeakers will need a few days toachieve optimum sonic performance.Quick start S6A Mk2Before connecting the loudspeakers to your audio components and thepower source make sure that both the loudspeakers and your audio systemis switched off!Set all level controls fully counterclockwise.Connect the loudspeakers with your audio units: Use a XLR cable. The maleplug goes into the loudspeaker, the female plug into your audio component.Check if the specified voltage matches the voltage of the power supplyyou use. If this is not the case do not connect the loudspeakers to a powersource! Please contact your local dealer or national distributor.If the voltages match, connect the loudspeaker via the included powercables to two AC sockets.Switch on your audio system. Switch on the main on/off switches on thefront panel of the loudspeakers.Turn on your source of music and adjust the volume carefully.1.21.1d)a)b)c)e) |
Related manuals for Adam S6A Mk2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine