Adaptec 131CA Installation And Hardware Manual

Contents

4-6AAA-131CA Installation and Hardware Guide11 Add other types of host adapters if necessary (see Step 4above), or click Close to exit the SCSI adapters portion ofWindows NT Setup, and then close the program.12 When you see this message, click OK to exit:The changes you have made will not take effect until the computer isrestartedIf this message does not appear, no changes have been made tothe Windows NT system configuration.13 Restart your computer and Windows NT. Some drive letterassignments may change from the previous configuration.Windows NT 4.0To install thecda1000.sys driver when Windows NT 4.0 is alreadyinstalled, follow these steps:1 Start Windows NT.2 Click the Start button on the Windows NT task bar, and thenpoint to Settings.3 Click the Control Panel.4 Double-click the SCSI Adapters icon.5 Click the Drivers tab, and then click the Add button.6 In the Install Driver window, click the Have Disk button.7 Insert the Adaptec Array1000CA Family Manager Set driversdiskette into drive A; enter the following path to the installa-tion files and then click OK.a:\winntThe Adaptec Array1000CA Family Adapter is highlighted bydefault.8 In the Install Driver window, Click OK.9 Click the New button when asked if you want to use the cur-rently installed driver(s) or install new one(s).10 Type a:\winnt again, and click Continue. The driver is nowinstalled.