Adaptec 1420SA Quick Installation Manual

Also see for 1420SA - Serial ATA II RAID Controller: Installation and user guide User guide Installation guide User guide Installation and user guide

Contents

Adaptec 1420SA Quick Installation Manual Manual pdf 15 page image

13Installing the Netware Driver in a New NetWare System2 Then type:3 Type:cd / of rpm files>4 Type:rpm -ivh (for a new install, or)rpm -Uvh --force (for an updated install)cdoreject (to eject disc)5 Reboot the system to enable the new/updated driver.Installing the Netware Driver in a NewNetWare SystemNote: For information about installing drivers if you use theNetWare CD to install your operating system, see your Novelldocumentation.To install the driver in a new Novell NetWare 6.5 operatingsystem:1 Install and configure the controller and disk drives as described inInstalling the Controller and Drives on page 6.2 Use the instructions provided in the NetWare manual to beginthe installation.3 When the No storage device was detected in this system. Load theappropriate driver (HAM) prompt appears, press Enter, then Esc.for Red Hat cd /mnt/cdromfor SuSE cd /media/cdromfor Red Hat umount /mnt/cdromfor SuSE umount /media/cdrom