Chapter 7: Installing the Driver and an Operating System ● 6511 Type the following commands to complete the driver installation:For Debian 32-bit:cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.26-2-686/kernel/drivers/scsi/aacraid/aacraid.kochroot /target/sbin/depmod -a 2.6.26-2-686update-initramfs -u -vexitFor Debian 64-bit:cp -f /AACRAID/aacraid.ko /target/lib/modules/2.6.26-2-amd64/kernel/drivers/scsi/aacraid/aacraid.kochroot /target/sbin/depmod -a 2.6.26-2-amd64update-initramfs -u -vexit12 Press CTRL+ALT+F5 to switch back to the installation screen, then reboot.13 Continue with Managing Your Storage Space on page 79.Installing with Ubuntu LinuxNote: You will need your Ubuntu Installation CD and a USB flash drive to complete this task.You must have root privileges to install the driver image.To install the Adaptec RAID controller driver while installing Ubuntu Linux:1 Create the driver disk:a Insert and mount the Adaptec Installation DVD:mount /dev/cdrom /mnt/cdromb Insert and mount a USB flash drive:mount /dev/sda1 /mnt/aacraid-driverc Change to the Linux driver directory on the Adaptec Installation DVD, locate the .tgzarchive file for your Ubuntu operating system version (32-bit or 64-bit), then extractthe contents of the archive to a temporary location.d Copy the contents of the archive to the USB drive by typing this command:cp /<tempdir>/* /mnt/aacraid-driverwhere tempdir is the temporary location of the driver files.e Unmount and remove the Adaptec Installation DVD and the USB drive.2 Insert the Ubuntu Installation CD, then restart your computer.3 When the Welcome screen appears, select Install Ubuntu Server, then typeCTRL+ALT+F2 to switch to the console.4 Insert the USB drive, then type the following command to scan for the device:fdisk -lNote: The following steps assume that the USB drive is assigned to /dev/sda1.
