2-4Adaptec Storage Manager Pro User’s Guide4 Click Finish when you are ready to create the array.The Create Array dialog box appears if you click Finishanytime before the final page of the Wizard.5 Review the settings in the Verify Array Creation Configurationdialog box, if it appears, to be sure the array is configured theway you want it.Click Back if you want to change any of the arrayconfiguration settings before creating the array.6 Click Create to create the array as described.The system creates the array using your selections and addsthe array to the System Browser window. You can begin usingthe array while Storage Manager Pro completes the Buildprocess. The Build task may take several hours to complete,depending on the array type, size of the array, and I/O load.Before you can write data to the array, you need to make thearray available for use. See Making the Array Available for Use onpage 2-13.Creating a Custom ArrayFrom the Create Array dialog box, you can customize the followingarray settings, each of which is explained in the steps below: Array name Array type Selected drivesTo create a customized array:1 In the System Browser window, select the controller where youwant to create the array.2 Click Create Array.– Alternate method: In the Details pane, select one or moredrives you want to use for an array and click Create Array.
