14TroubleshootingTroubleshootingIf you encounter difficulties using your FireConnect for Notebooksadapter, check the following: Is the adapter inserted completely in the CardBus slot? Is the cable properly connected to the FireConnect for Notebooksadapter and the device? Is your device powered on? Does the device require externalpower from the FireConnect for Notebooks adapter? Are you having problems using your notebook computer afteryou disconnect a device? If so, restart the computer, and see ifthe problem clears up. Windows only: Are you using a repeater? If the Device Managersays the device is working properly, there may be a badconnection between the FireConnect for Notebooks adapter andthe repeater. Shut down the computer and remove the FireConnectfor Notebooks adapter from the CardBus slot. If you are usingWindows 2000, see Removing the FireConnect for NotebooksAdapter – Windows 2000 only on page 10. Then, reinsert theFireConnect for Notebooks adapter and reconnect the repeater. Under Macintosh OS 9, do you see either of theFireConnect for Notebooks adapter icon shown atright on your desktop? This means the driver isdisabled or not installed. See Installing the MacintoshDriver on page 11. If you have further difficulties,check the Readme file on the FireConnect forNotebooks CD and http://www.adaptec.com.For more troubleshooting information, visit http://www.adaptec.comand http://ask.adaptec.com.