Adaptec AFW-4300 User Reference

Also see for AFW-4300: Hardware installation guide

Contents

8AFW-4300 User’s ReferenceTroubleshootingThe following tips are general troubleshooting procedures: Check that the card is seated evenly all the way into the PCIslot. Check motherboard system documentation to ensure that busmastering support is provided and enabled for the slotcontaining the AFW-4300. Check if the card is not detected by the operating systemand/or the driver fails to load, to try moving the card to adifferent PCI slot. Check that the 1394 cable is properly connected between yourAFW-4300 and the DV camcorder or other peripehrals. Check the Windows 2000 Event Log if you encounter problemsloading the drivers on your Windows 2000 operating system. Check the Troubleshooting section of your operating systemuser manual. Check the Software Tutorial or Read Me file on this CD if youencounter any problems with your software. For the Power Macintosh system, verify that the card is seen bythe Apple System ProfilerTo verify that the card is seen by the Apple System Profiler,follow these steps:1. Pull down from the Apple Menu to Apple System Profiler.2. Click the Devices and Volumes tab.