1-13IntroductionStorage Management Software OverviewYour Adaptec RAID controller includes the following software toolsto manage your storage subsystem: Storage Manager Pro—The Graphical User Interface (GUI)through which you interact with the storage subsystem. Itprovides an intuitive graphical interface that enables you to dosuch things as create and manage RAID arrays, set up securitylevels for users and administrators, establish the means ofnotifying users of disk failures, etc.Storage Manager Pro is supported under the followingoperating systems: Windows 2000, Windows NT 4.0, Windows 95/98 Novell NetWare 4.2; 5.x Red Hat Linux 6.x FreeBSDIn summary, Storage Manager Pro is Adaptec’s primary RAIDmanagement tool. For details, refer to the Adaptec StorageManager Pro Software User’s Guide.Note: You will be prompted to provide a user ID andpassword when you start Storage Manager Pro. The defaultuser ID is administrator, the default password is adaptec. Fordetails, refer to the Storage Manager Pro User’s Guide. Storage Manager—Older storage management software thatprovides the same basic functionality as Storage Manager Pro,but has the advantage of supporting the following additionaloperating systems: Windows Me SuSE Linux 6.4 and 7.0 SCO UNIXFurthermore, Storage Manager provides additional features,such as DMI agents, that are not yet available in StorageManager Pro. Use Storage Manager if you require theseadditional operating systems, or if you require a feature that
