Adaptec Storage Manager User Manual

Also see for 2005S - SCSI RAID Storage Controller: Installation guide

Contents

Adaptec Storage Manager User Manual Manual pdf 148 page image

Chapter 16: Solving Problems ● 147Identifying a Failed or Failing ComponentWhen your are notified of a Warning- or Error-level event, use AdaptecStorage Manager’s rapid fault isolation feature to quickly identify thesource of the problem.For instance, in the example below a disk drive has failed. To find thefailed disk drive, follow the yellow Error icons:Recovering from a Disk Drive FailureWhen a disk drive fails for any reason, it is represented inAdaptec Storage Manager with a red X, as shown at right.This section explains how to recover when a disk drive fails:● If the logical drive was protected by a hot spare (see page 148).● If the logical drive was not protected by a hot spare (see page 149).● If there is a disk drive failure in more than one logical drivesimultaneously (see page 149).● If it is a RAID 0 logical drive (see page 149).● If multiple disk drives fail within the same logical drive (see page 150).Error is on the local system......on Controller 1......and both the failed disk drive (marked with red X)and hot spare (with yellow +) are affected.