Addonics Technologies ZDVRRWESU User Manual
Also see for ZDVRRWESU: User guide
    | |
Hardware Installation1. Connect the power adapter to the power connector located at the backof the enclosure.2. Connect the data cable usinga. eSATA connectionNote: You should have configured the eSATA host controlleron your system before you connect the writer. Once theeSATA host controller is configured, do the following stepsbelow.Plug-in the eSATA cable to the eSATA port on the enclosureand attached the other end to your eSATA host controller.b. Or USB2.0 connectionAttach the USB cable to the USB port on the enclosure and inyour system.3. Power ON the enclosure using the switch on the back panel. Youshould see the Green Power LED on the front panel at the bottom rightlight up.Note: Windows 2000 & XP use built-in USB drivers. No need to installthird-party drivers.FrontEject ButtonDrive Activity LEDPower LEDwww.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ |
Related manuals for Addonics Technologies ZDVRRWESU
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine