Adesys Octalarm-Touch Manual
Also see for Octalarm-Touch: Quick startQuick startManual
                      | |
Page 14Manual Octalarm-Touch | Back to indexAdesys B.V. | Wateringen7.3.2. SpeakerThis window is used to adjust the speaker volume. With a minimum of 20% the general volume cannot bemuted completely. If you want to completely mute the system volume, you can set this using chapter “6.1.Configuring inputs”.If the buzzer is disabled at an input connection, theexternal buzzer will not sound the alarm either.Adjusting the speaker• Go to ‘Settings’.• In de navigation, scroll to ‘Speaker’.• Press ‘Change’.• Move the bar to the desired volume.• Press ‘Save’.7.3.3. OutputsThe Octalarm-Touch has two open drain outputconnectors and two relay output connectors. Thesecan be set to function as:• External buzzerThe output connector will respond in the sameway as the Octalarm-Touch buzzer. This meansthat when the Octalarm-Touch buzzer is enabled,the output connector is powered.• External flash lightWhen the alarm is active, the output connector ispowered.Overview of output connectorsRelay contact Max load 30VDC / 2A, 30VAC / 1A (resistive load)Open drain output Max switching voltage 42V / 300mAMax load current 350mAOutput voltage 12V / 120mAProtection Short circuit, thermalChanging output connectiors• Go to ‘Settings’.• In the navigation, scroll to ‘Outputs’.• Press ‘Change’.• Next, for both the relay outputs and for open collector, where applicable, select None | External buzzer| Flash light• Press ‘Save’.7.3.4. Factory settingsThe installer and the administrator can clear all settings of the Octalarm-Touch. This feature is usefulwhen, for example, the Octalarm-Touch is taken to another location. The log will not be deleted when thesystem is reset to the factory settings.Restoring the factory settings• Go to ‘Settings’.• In the navigation, scroll to ‘Factory settings’.• Press ‘Restore’.7.3.5. Software updateThe software for the Octalarm-Touch is updatedcontinually. This may be to improve usage, to resolveproblems, or to add new options. It is important thatthe Octalarm-Touch has the latest software version.You can check if your Octalarm-Touch is up-to-dateunder ‘Settings’ | ‘Software update’. This is alsowhere you can find the release notes, which containthe changes in each version in the version history. |
Related manuals for Adesys Octalarm-Touch
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine