Adkins Hobby Jack Operator's Manual
                    | |
For your own safety read the following instructions carefully before attempting to connectthis unit to the mains.For safety reasons your Hobby Jack heat press must be sited close to a power outlet foreasy reach in the event of a problem.MAINS (AC) OPERATIONYour Hobby Jack heat press is designed to operate on 230V~50Hz only. Connecting it toother power sources may damage the unit.The wires in the power lead are coloured in accordance with the following:BLUE = NEUTRAL, BROWN = LIVE, GREEN + YELLOW = EARTHIMPORTANTAs the colour of the wires in the power lead of your Hobby Jack heat press may notcorrespond with the coloured markings identifying the terminals in your plug, pleaseproceed as follows:The wire which is coloured blue must be connected to the terminal which is marked withthe letter N.The wire which is coloured brown must be connected to the terminal which is markedwith the letter L.The wire which is coloured green + yellow must be connected to the terminal which ismarked with the letter E.If a 13 Amp (BS 1363) plug is used, a 13 Amp fuse must be fitted, or if any other plug isused a 13 Amp fuse must be fitted, either in the plug or adapter (if used) or on the maindistribution board.4.5.1.2.3.4.Special instructions (continued)earth wire (green and yellow)neutral wire (blue)cable clampplastic casepower leadlive wire (brown)fuseOperators ManualSpecial instructions4 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine