Admiral Craft CHM-1200W User Manual
84. Do not dismantle or modify the device, serious accidents may happen whendismantling or modifying.5. Do not open the appliance enclosure. The appliance contains high pressureelectric circuit, electric shock may occur when dismantling the frame.6. Unscrew the plug and cut off the power when cleaning.7. Do not spray water directly to the product when cleaning. Water can conductelectricity, thus electric leakage may cause electric shock.8. Do not pat the product and put heavy object onto the product.9. Abnormal operation may cause damage and danger.10. High temperature may cause scald.11. Do not touch the appliance directly with hand due to high temperature during orafter the operation.12. When the thunderstorm is coming, cut off the power supply asap to avoid damagedone by the lighting stroke13. Do not destroy the control panel with hard or sharp objects.14. After working, disconnect it from power.15. All the servicing work would be dangerous for people other than qualifiedpersonnel.16. If the supply cord is damaged, to avoid danger, the substitution work should bedone by the manufacturer, its maintenance department or similar professionalpersonnel.5. Using Instructions1. Check all the parameters and installation before using. Only use it wheneverything’s correct.2. When cooking, please wear athermic gloves. To avoid burnings, do not touch thedevice enclosure.3. When the device is powered on, if the proportioner knob is in a position shown infigure <1>, the heating indicator is off and the elements are not working. Rotatethe knob, the indicator will be on and the device is working with the power.4. Turn the knob clockwise just like shown in figure <2>, the heating elements startto work in a way of intermittent operation and the working power will increase asthe rotation angle increases. When the temperature reaches the desired value,the elements will stop working (the indicator turns off at the same time); when thechamber temperature drops, the device will heat up automatically (while theindicator turns on again); the device works in such a circulation to keep thechamber temperature at a constant set temperature. And when the knob is in theposition of figure <3>, the heating elements work continuously without interruption.Continue to rotate the knob clockwise to “OFF”position, the device stopsworking. If rotate the knob anticlockwise, the device will work conversely. |
manualsdatabase
Your AI-powered manual search engine