21AppendixTroubleshootingIf you are experiencing trouble with the LCD display, refer to the following. If the problempersists, please contact your local dealer or our service center.Problem: No image appears on screen.► Check that all the I/O and power connectors are correctly and well connectedas described in the “Installation” section.► Make sure the pins of the connectors are not crooked or broken.Problem: Partial Image or incorrectly displayed image.► Check to see if the resolution of your computer is higher than that of the LCDdisplay.► Reconfigure the resolution of your computer to make it less than or equal to1920 x 1080.Problem: Image has vertical flickering line bars.► Use “Horizontal size” to make an adjustment.► Check and reconfigure the display mode of the vertical refresh rate of yourgraphic card to make it compatible with the LCD display.Problem: Image is unstable and flickering► Use “Fine” to make an adjustment.Problem: Image is scrolling► Check and make sure the VGA signal cable (or adapter) is securely connected.► Check and reconfigure the display mode of the vertical refresh rate of yourgraphics card to make it compatible with the LCD display.Problem: Vague image (characters and graphics)► Use “Horizontal size” to make an adjustment. If this problem still exists, use “Fine”to make an adjustment.