ENGLISH INSTRUCTIONS FOR USE2 9096910000(2)2010-03 Adfinity™ 20D - X20D - X20C - X24DINTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.Before carrying out any procedure on the machine, the operators and qualified technicians must read this Manual carefully. ContactAdvance in case of doubts regarding the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not carry out procedures reserved for qualified technicians. Advance will not be answerable for damagescoming from the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and other substancesthat can cause damage to it.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (34).The machine model year is shown after the Date Code on the serial plate (A10 means January 2010).This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.MACHINE model ...............................................................................MACHINE serial number ...................................................................OTHER REFERENCE MANUALSElectronic battery charger Manual to be considered as integral part of this Manual–Moreover, the following Manuals are available:Service Manual (that can be consulted at Advance Service Centers)–Spare Parts List (supplied with the machine)–SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by Advance ServiceCenters. Only original spare parts and accessories must be used.Contact Advance for service or to order spare parts and accessories, specifying the machine model and serial number.CHANGES AND IMPROVEMENTSAdvance constantly improves its products and reserves the right to make changes and improvements at its discretion without beingobliged to apply such benefits to the machines that were previously sold.Any change and/or addition of accessories must be approved and performed by Advance.OPERATION CAPABILITIESThese scrubber-dryers are used to clean (scrubbing and drying) smooth and solid floors, in civil or industrial environment, undersafe operation conditions by a qualified operator.The scrubber-dryer cannot be used for moquette and carpet cleaning.CONVENTIONSForward and backward, front and rear, left and right references are intended with the operator in driving position with the hands onthe handlebar (2).