User Guide for the Platinum Series Sound Processor 13CableThe cable connects the headpiece to the processor and provides the pathway forrelaying information between the internal and external components of the system.Cables are available in multiple lengths in either beige or brown. Each cable includesa small clip that can be used with clothing to help hold the cable in place. At one endof the cable is a two-pin plug that is inserted into the headpiece. Please note that thepins are of different diameters and must be inserted correctly. A small coaxial plug islocated at the other end of the cable. This plug is inserted into the headpiece jack onthe processor.To remove the cable from the headpiece, always hold the cable’s strain relief (theplastic plug) and gently pull it away. The cable should be removed from the head-piece only when it is being replaced.Figure 10: Headpiece with Cable.NOTE: Be sure the processor is turned off before removing the cable fromthe headpiece.HeadpieceCableStrain ReliefCable ClipCoaxial PlugStrain ReliefMicrophone2 Pin Plug
