Advanced Elements AdvancedFrame Expedition AE1009 Owner's Manual

Also see for AdvancedFrame AE1012: Owner's manual Owner's manual Owner's manual

Contents

Advanced Elements AdvancedFrame Expedition AE1009 Owner's Manual Manual pdf 9 page image

AdvancedFrame Expedition™ Inflatable Kayak Owner’s ManualDiagram of Inflation Chambers3.3 InflatingIMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflateyour kayak in the following order. Failure to follow these instructions may cause damage toyour kayak. Do not over inflate.1. Partially inflate chamber 1 until the kayak begins to fill out or appears to be half way inflatedthen close cap. Check to be sure the valve is in the inflate position (See Figure 1).2. Inflate chamber 2 until the AdvancedFrame™ tube is firm to touch (2.0 psi ONLY).3. Inflate chamber 3 “floor“ (using appropriate fitting). Twist valve open to inflate and twistclosed when complete (See Figure 2). Fill until firm. Do Not Over-Inflate! (1.0 psi ONLY)4. Inflate Coaming chambers 4 & 5 until firm. Never over-inflate! (1.0 psi ONLY)5. Inflate chamber 6 & 7/8 & 9 for desired deck lift. Never over-inflate! (1.0 psi ONLY)6. Make sure all valves are closed tightly and properly.7. Finally, Insert Plastic Bow and Stern forms into pocket on bow and stern (Figure 3).Figure 3. Plastic Bow and Stern Insert