Advanced Elements Lagoon2 AE1033 Owner's Manual

Contents

Advanced Elements Lagoon2 AE1033 Owner's Manual Manual pdf 10 page image

TM10Diagram of Inflation Chambers3.3 InflatingIMPORTANT: Inflate your kayak in the following order. Failure to follow these instructionsmay cause damage to your kayak. Do not over inflate. Be sure to read directions onoperating the spring valves and twist valves located in the section “Understanding your valves”.Before inflating please be sure that the foam floor is positioned inside the kayak seating area,underneath the side inflation tubes. When the kayak is inflated it will hold the foam floor inplace.1. Inflate chamber 1 “main1” until the kayak looks about half way inflated.2. Inflate chamber 2 “main2” until the kayak feels firm to touch. There should be just a fewwrinkles visible on the side GRAY TUBE COVERS.3. Inflate chambers 3 and 4 “deck lift tubes” until firm.4. Inflate chambers 5,6,7,8 until firm.5. Inflate seat cushion to desired firmness and attach to kayak using provided strap.6. Make sure all valves are closed tightly and properly.NOTE: Ideally you want to put about half of the air in Chamber 1 and half into chamber 2. Thisway if you were to loose pressure in one chamber then you would have the other chamber tofloat the kayak.