Advanced Instruments, Inc39Be sure to pack the analyzer securely. Include your name, address, telephone number, and a description ofthe operating problem. After repairing or, at our option, replacing your Advanced Instruments Inc. analyzer,we will ship it to you at no cost for parts and labor.10. MSDS – Material Safety Data SheetProduct IdentificationProduct Name Oxygen Sensor Series - PSR, GPR, AII, XLTSynonyms Electrochemical Sensor, Galvanic Fuel CellManufacturer Advanced Instruments Inc., 2855 Metropolitan Place, Pomona, CA 91767 USAEmergency Phone Number 909-392-6900Preparation / Revision Date January 1, 1995Notes Oxygen sensors are sealed, contain protective coverings and in normal conditions do notpresent a health hazard. Information applies to electrolyte unless otherwise noted.Specific Generic IngredientsCarcinogens at levels > 0.1% NoneOthers at levels > 1.0% Potassium Hydroxide or Acetic Acid, LeadCAS Number Potassium Hydroxide = KOH 1310-58-3 or Acetic Acid = 64-19-7, Lead = Pb 7439-92-1Chemical (Synonym) andFamilyPotassium Hydroxide (KOH) – Base or Acetic Acid (CH 3 CO 2H) – Acid, Lead (Pb) – MetalGeneral RequirementsUse Potassium Hydroxide or Acetic Acid - electrolyte, Lead - anodeHandling Rubber or latex gloves, safety glassesStorage IndefinitelyPhysical PropertiesBoiling Point Range KOH = 100 to 115° C or Acetic Acid = 100 to 117° CMelting Point Range KOH -10 to 0° C or Acetic Acid – NA, Lead 327° CFreezing Point KOH = -40 to -10° C or Acetic Acid = -40 to -10° CMolecular Weight KOH = 56 or Acetic Acid – NA, Lead = 207Specific Gravity KOH = 1.09 @ 20° C, Acetic Acid = 1.05 @ 20° CVapor Pressure KOH = NA or Acetic Acid = 11.4 @ 20° CVapor Density KOH – NA or Acetic Acid = 2.07pH KOH > 14 or Acetic Acid = 2-3Solubility in H2 O Complete% Volatiles by Volume NoneEvaporation Rate Similar to waterAppearance and Odor Aqueous solutions: KOH = Colorless, odorless or Acetic Acid = Colorless, vinegar-likeodorFire and Explosion DataFlash and Fire Points Not applicable