Advanced Technology Video M170CP3 User Manual
                                        | |
English - 5SETUPSETUPStand Assembling Procedures(Case#1)1. Put some smooth pad or cloth on the level surface and place themonitor on it with the face downward.2. Join the stand with the metal protrusion from the bottom of themonitor’s main body.The monitor is packed with stand and main body separated.Please join the stand with the main body before use.3. Tighten the screw fully at the bottom of the stand by turning itclockwise three to four turns.4. After fully tightening the screw, bend the knob of the screw onto thebottom of the stand.Caution : Incomplete tightening of the screw may cause the monitor unstable. |
manualsdatabase
Your AI-powered manual search engine