ARK-2150 User Manual 61.3.2 iManagerDIOITE 8518E or PCA9554 supports:ARK-2150L:– 9 I/O pins with one ground pin– 5V tolerance I/Os.*ARK-2150L: 9 pins DSUB 9 connectorARK-2150F:Isolated Digital Input– Number of Channel: 4– Optical Isolation: 2,500 VDC– Opto-isolator response time: 25μs– Input Voltage: VIH (max.) 30 VDCVIH (min.) 5 VDCVIL (max.) 2 VDC– Input Current: 5 VDC 1.4 mA (typical)12 VDC 3.9 mA (typical)24 VDC 8.2 mA (typical)30 VDC 10.3 mA (typical)Isolated Digital Output– Number of Channel: 4– Optical Isolation: 2,500 VDC– Output Voltage: Open collector 5 to 40 VDC– Sink Current: 200 mA max./channel*ARK-2150F: 10 pins phoenix connectorDIO Connectors: ARK-2150L: 9 pins DSUB 9 connector ARK-2150F: 10 pins phoenix connectorBattery backup BATTERY 3V/210 mAh with WIRE x 1iManagerSequence control SupportedDIO 8-bit programmable DIOWatchdog timer Multi Level WDT (set by Advantech iManager)Programmable 1-255 sec / minHardware monitor CPU Temperature / input Current / input VoltagePower saving Deep sleep S5 mode / Smart Fan / Back light controlSystem information Running HR / Boot record
