Advantech IDK-1115WP Series User Manual

Contents

Advantech IDK-1115WP Series User Manual Manual pdf 26 page image

IDK-1115WP User Manual 204.1 Touchscreen4.1.1 Touch CharacteristicsIDK-1115WP series products use projected capacitive touchscreens.4.1.2 Optical Characteristics4.1.3 Mechanical Characteristics4.2 Touch ControllerAdvantech’s IDK-1115WP series projective capacitive touch screen adopts a COF(Chip on FPC) design so an extra touch control board is not required. This communi-cates with a PC system directly through USB connectors. The superior design is sen-sitive, accurate and user friendly.Item SpecificationsTransparency 87±2%Haze < 0.5%Item SpecificationsSurface Hardness 7H (Follows JIS K 5600 standard, use Mitsubi-shi Pencil 750g)Cover Lens Thickness 1.8mmOverall Thickness 2.33±0.20mmCompressive Stress >=400 MpaController and Tail Type COF (Chip on FPC tail)FPC Tail Bending Radius R2.5mmHolding Force for Tail 0.7kg to pull strength and sustain minutes instraight-line pulling (180 degrees) and 90degrees pulling orientationConnector Pins & Pitch 4pins, pitch is 1.25mmTop Surface Finish Type ClearDecoration Lens Artwork Black border