Advantech IDK-121R-42XGA1 User Manual

Advantech IDK-121R-42XGA1 User Manual Manual pdf 19 page image

13 IDK-1112R User ManualChapter 3 Signal CharacteristicsNote 1 Input signals shall be in low status when VDD is off.Note 2 High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”.Note 3 RSV stands for “Reserved”.Note 4 Input signals shall be in low status when VDD is off.Note 5 If in 6-bit mode, please keep pin 17 & pin 18 NC or make sure that the volt-age of pin 17 is always higher than the Voltage of pin 18.3.2 The Input Data Format3.2.1 SEL68Note1 Please follow PSWG.Note2 R/G/B data 7:MSB, R/G/B data 0:LSBSignal Name Description Remark+RED5(R5) Red Data 5(MSB) Red-pixel DataEach red pixel’s brightness data consists ofthese 6 bits pixel data.+RED4(R4) Red Data 4+RED3(R3) Red Data 3+RED2(R2) Red Data 2+RED1(R1) Red Data 1+RED0(R0) Red Data 0 (LSB)Red-pixel Data