PCM-3342 User Manual 18! Agent after Boot [Disabled]This item allows user to set agent running after boot mode.! Delay For HDD (Secs) [0]This item allows user to set delay for HDD (secs).! USB Device Setting [Press Enter] (Show Only)This item allows users to set USB related features.3.2.4 Advanced Chipset Features! EVA4150 IO Config [Press Enter] (Show Only)This item allows a user to set EVA4150 UART, LPT resources.! EVA4150 PowerDown Setting [Press Enter] (Show Only)This item allows a user to set IDE, USB2.0, COM1 ,COM2 powerdown function.! EVA4150 GPIO Config [Press Enter] (Show Only)This item allows a user to set all of the GPIO resources.! SMI712 VGA Setting [Press Enter] (Show Only)This item allows a user to set VGA related features.! SDRAM: Write Recovery Time [2T]This item allows a user to set the DRAM Write Recovery Time.! Watch Dog Timer reset [Disabled]This item allows a user to set watch dog timer.! Do CMOS Clear [Disabled]This item allows a user to clear CMOS.! I/O Cycle Control [Disabled]This item allows a user to set I/O cycle control mode.! CPU Fast Decode Cycle [Normal]Note! The "Advanced Chipset Features" screen controls the configuration ofthe board∞∂s chipset register settings and performance tuning - theoptions on this screen may vary depending on the chipset type. It isstrongly recommended that only technical users make changes to thedefault settings.