37 Chapter 4.4.6.4 Video Off In SuspendWhen system is in suspend, video will turn off.4.6.5 Modem Use IRQThis determines the IRQ in which the MODEM can use.The choices: 3, 4,5, 7, 9, 10, 11, NA.4.6.6 HDD Power DownYou can choose to turn the HDD off after one of the time intervals listed,or when the system is in “suspend” mode. If the HDD is in a power sav-ing mode, any access to it will wake it up.4.6.7 Soft-Off by PWR-BTTNIf you choose “Instant-Off”, then pushing the ATX soft power switch but-ton once will switch the system to “system off” power mode. You canchoose “Delay 4 sec.” If you do, then pushing the button for more than 4seconds will turn off the system, whereas pushing the button momentarily(for less than 4 seconds) will switch the system to “suspend” mode.4.6.8 CPU THRM-ThrottlingThis field allows you to select the CPU THRM-Throttling rate. Thechoices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.4.6.9 PowerOn By LANThis item allows you to wake up the system via LAN from the remote-host. The choices: Enabled, Disabled.4.6.10 PowerOn By ModemWhen Enabled, an input signal on the serial Ring Indicator (RI) line (inother words, an incoming call on the modem) awakens the system from asoft off state. The choices: Enabled, Disabled.4.6.11 PowerOn By AlarmMin. Power Saving Minimum power management., Suspend Mode = 1 hr.,and HDD Power Down = 15 min.Max. Power Saving Maximum power management., Suspend Mode = 1 min.,and HDD Power Down = 1 min.User Defined(Default)Allows you to set each mode individually. When not dis-abled, each of the ranges are from 1 min. to 1 hr. exceptfor HDD Power Down which ranges from 1 min. to 15 min.and disable.
