13 UTC-315 User ManualChapter 2 System Setup2.4 Installing System SoftwareRecent releases of operating systems from major vendors include setup programswhich load automatically and guide you through hard disk preparation and operatingsystem installation. The guidelines below will help you determine the steps necessaryto install your operating system on the UTC-315 hard drive.Installing software requires an installed HDD. Software can be loaded in the UTC-315using any of four methods:2.4.1 Method 1: EthernetYou can use the Ethernet port to download software to the HDD.2.4.2 Method 2: External USB CD-ROMIf required, insert your operating system's installation or setup diskette into the dis-kette drive until the release button pops out.The BIOS of UTC-315 supports system boot-up directly from the CD-ROM drive. Youmay also insert your system installation CD-ROM into the CD-ROM drive.Power on your UTC-315 or reset the system by pressing the “Ctrl+Alt+Del” keyssimultaneously. The UTC-315 will automatically load the operating system from thediskette or CD-ROM.If you are presented with the opening screen of a setup or installation program, followthe instructions on screen. The setup program will guide you through preparation ofyour hard drive, and installation of the operating system. If you are presented with anoperating system command prompt, such as A:\>, then you must partition and formatyour hard drive, and manually copy the operating system files to it. Refer to youroperating system user manual for instructions on partitioning and formatting a harddrive.2.5 Installing the DriversAfter installing your system software, you will be able to set up the Ethernet, Chipset,Graphic, audio, USB3.0 and touchscreen functions. you can download the driversfrom advantech website.Note! Some distributors and system integrators may have already pre-installed system software prior to shipment of your UTC-315.Note! The drivers and utilities used for the UTC-315 are subject to changewithout notice.If in doubt, check Advantech's website or contact our application engi-neers for the latest information regarding drivers and utilities.