9 UTC-520 User ManualChapter 2 System SetupA. Antenna connecter E. VGAB. USB 2.0 x 2 F. DC InletC. Gigabit LAN x 2 G. Power SwitchD. COM port H. Compact Flash slot2.2 Installation Procedures2.2.1 Connecting the power cordThe UTC-520 can be powered by a DC electrical outlet. Be sure to always handle thepower cords by holding the plug ends only. Please follow the Figure 2.5 to connectthe male plug of the power cord to the DC inlet of the UTC-520.2.2.2 Connecting the keyboard or mouseBefore you start the computer, please connect keyboard port on the I/O section of theUTC-520.2.2.3 Switching on the powerWhen you look at the rear side of the UTC-520, you will see the power switch asshown in Figure 2.2.Figure 2.3 Connect the power cord to the DC inletA B C D E F GHWarning! Failure to plug the green power adapter jack into the UTC-520 first,BEFORE turning on power will result in damage to the motherboard.Power cord AC/DC Power adapterDC inlet
