Advantek Networks AWR-654GR User Manual

Advantek Networks AWR-654GR User Manual Manual pdf 9 page image

Button/port DescriptionDC IN Connect with DC Power Adapter.Reset Reset configurations to default. Press the button and hold for 10seconds.WPS Click WPS button about 2-3 seconds while you are connecting a PC ofwireless adapter with WPS function (you must enable WPS’ PBCfunction).LAN(1x, 2x, 3x, 4x)Connect LAN systems with RJ-45 cable.WAN Connect DSL or Cable modem.1.4 System RequirementsBefore installing the Wireless Router, ensure that your system/network meets he followingrequirements:‧ One or more PCs (desktop or notebook) with Ethernet interface.‧ TCP/IP protocol must be installed on all PCs.‧ Have valid Internet Access account and a DSL or cable modem.‧ 10Base-T/100Base-TX network cables with RJ-45 connectors.‧ In case to use Wireless Access Point, all Wireless devices must be compliant withIEEE 802.11b/g.‧ System with MS Internet Explorer ver. 6.0 or later version1.5 Before you proceedTake note of the following guidelines before installing the Wireless Router:‧ The length of the Ethernet cable that connects the device to the network (hub,ADSL/cable modem, router, wall patch) must not exceed 100 meters.‧ Place the device on a flat, stable surface as far from the ground as possible.‧ Keep the device clear from metal obstructions and away from direct sunlight.‧ Keep the device away from transformers, heavy-duty motors, fluorescent lights,microwave ovens, refrigerators, and other industrial equipment to prevent signal loss.‧ Install the device in a central area to provide ideal coverage for all wireless mobiledevices.8