Advent AMN101 Installation And Operation Manual

Contents

4AMN101UPDATA BUSANTENNA RESETNSEWAMN101Mobile NavigationAdvent AMM10GPS AntennaSDCARDAdvent AMM12SMBNAV BusSecure Smartbus Cablewith 11mm (.4in) ScrewConnections1. Insert one end of the Smartbus cable into the “DATA BUS” slot on the side of theAMN101 and secure it with a 11mm (.4in) screw (provided). Connect the other end of thecable to the AMN101 input on the back of your Advent navigation-ready head unit(AMM10, AMM12). If using a AMM10, secure the cable to the radio using a 11mm (.4in)screw. The AMM12 has a cable to cable connection and does not require an anchorscrew.2. Attach the GPS Antenna to the “ANTENNA” jack on the side of the AMN101.3. Insert SD card into the SD card slot and gently press the card in against the spring latchuntil it stops, then release. The card will "lock" firmly into place inside the SD card slot.