14Acquiring a Satellite SignalThe initial GPS location lock is best established when your vehicle is parked. Ifthe device is in motion, the signal can take longer to initially connect. Once theinitial coordinates are established, the software will follow you as you move andnavigate.Drive your vehicle to an open area where the GPS signal can be clearly receivedand park the vehicle. If the device is in motion, the signal can take longer toinitially connect.If you cannot acquire the signal, drive to another location. If the signal is stillunobtainable, check your antenna installation.Once a GPS signal has been established, verify that the information display clocktime (time displayed on the radio) matches the navigation system clock. With anestablished GPS signal, the software will follow you as you move and navigate.The GPS reception quality icon shows the current accuracy of the positioninformation.Icon DescriptioniGO primo has no connection to the GPS receiver: GPSnavigation is not possible.Devices with a built-in GPS receiver are permanentlyconnected. On such devices, the icon does not appear innormal circumstances.iGO primo is connected to the GPS receiver, but thesignal is too weak and the receiver cannot determine theGPS position.GPS navigation is not possible.Only a few satellites are received. Position information isavailable, but elevation (altitude) cannot be calculated.GPS navigation is possible, but the position error may besignificant.Altitude information is available, the position is a 3Dposition.GPS navigation is possible.
