AutoAnchor 560 Owner's Manual
Also see for 560: Quick user guideOwner's manual
                              | |
23To Check LogsThe AutoAnchor must be turned on.Press to access the Menu.Select Logs.Return to the menu.Exit and return to start screen.Logs can be cleared using the Factory Default Settings.Resetting the Factory defaults clears all programmed settings.To Adjust BacklightThe AutoAnchor must be turned on. It is best to change this setting in low light.Press to access the Menu.Select BacklightChange the Backlighting level.Save and return to the menuExit and return to start screenPART 5 MAINTENANCEThe AutoAnchor does not contain any user servicable parts.User maintenance is limited to :• Checking all cables and connections for signs of wear or damage and replacing them asnecessary.• Checking the sensor head is not worn and has not moved out of alignment with themagnet and replacing the sensor if necessary. After any sensor repairs or changes tosensor installation reset the sensor by clearing to zero twice.• Checking the magnet is not worn or corroded and replacing the magnet if necessary.Note: Do not use chemical or abrasive materials to clean the console unit. If it is dirty wipeit with a clean damp cloth. Avoid wiping the display screen with a dry cloth as this couldscratch the screen.OTHER OPERATION SETTINGSPress to access the menu when the AutoAnchor is turned on.To Clear to ZeroThe AutoAnchor must be turned on.Press to access the Menu.Select clear to zeroSelect No/Yesyes - return to start screenNo - return to the menu, then press againto return to the start screen.910742112 |
Related manuals for AutoAnchor 560
manualsdatabase
Your AI-powered manual search engine