30PART 4 OPERATIONAA570 BUTTONSNote: Some operators prefer to swap the Up/Down buttons as follows:Up = Out and Down = In.In an emergency shut off thepower to the windlass usingthe isolating/breaker switch.downUp Auto ON/OFFSensor Pulse Indicator& Windlass DirectionStandard AAOperationFunctionsHold 2 secto Turn OffHold 2 secto UnlockStatus bar4.1 INFORMATION dISPLAyEd dURING OPERATIONThe length of rode deployed in feet, metres or fathoms.The direction the anchor is moving.The type of rode being deployed (chain or rope).Windlass speed.Settings and measurements are saved if the unit is turned off or the battery fails.Counting continues if the windlass is operated by another control eg foot switches.•••• 15 uu4.1.1 LockThe AutoAnchor is fitted with a lock to help protect against unintentional windlassoperation.Hold the Mode button for 2 seconds to unlock.UnlockedLockedThe lock automatically resets 5 minutes after the AutoAnchor was last operated or whenthe AutoAnchor is turned off. You can also reset the lock by holding down the buttonuntil the key is displayed in the top right corner.Signal Strength