21A320 P E R S O N A L M ixER U S E R G U iDEUnderstanding Stereo Placement on the A320When Stereo Placement is selected for editing, two red LEDs are used to indicate the location of thesources within the stereo image. The default spread for a stereo source is full left and full right.The following example shows the eleven relative Stereo Placement positions available for a stereo channel.As you change the Stereo Placement setting for a channel, you’ll notice that the center-panned optionsappear twice—as you move from the left side of the stereo image to the right and again as you move fromthe right back to the left.LEFTDefault DefaultRIGHTThe A320 Stereo Placement LED positionsThe stereo positions have been carefully selected to be both easy to use and musically useful whileperforming live on stage or in the studio.