37AN-16/i -M M ic iNput M odule user G uideAN-16/i-MAN-16/i-MAN-16/i-MAN-16/oAN-16/oAN-16/oAN-16/oAN-16/i-MA-Net Out A-Net InABCDABCDBr idgeSystem Bridge System BridgePorts A, B, and C use the same type of module.AN-16/oAN-16/i-MAN-16/i-MAN-16/i-MAN-16/i-MAN-16/oAN-16/oAN-16/oA-Net Out A-Net InABCDABCDBr idgeSystem Bridge System BridgePorts B, C, and D use the same type of module.For a 32 x 32 configuration, place two similar modules together, connected toports B, and C on the System Bridge. The modules connected to ports A andD are also similar by doing this configuration. See the following diagram.AN-16/oAN-16/i-MAN-16/i-MAN-16/oAN-16/i-MAN-16/oAN-16/oAN-16/i-MA-Net Out A-Net InABCDABCDBr idgeSystem Bridge System BridgePorts A, and D use the same type of module; ports B and C contain the same typeof module.The total A‑Net cable length between devices is limited to 500 feet.Expanding a NetworkAs mentioned in the section on 32‑channel systems, any available A‑NetOut jack on an A‑Net device can be used to expand an existing system. Anynumber of additional AN‑16/o Output Modules can be added, as can anynumber of A‑16II or A‑16R Personal Mixers. A‑Net Distributors (the A‑16D and