Aviom MH10f User Manual
Also see for MH10: User guide
                                         | |
Contents
| 
FroNt PANel FeAturesFront Panel FeaturesThis section describes the features and functions of all front-panelcomponents of the MH10 and MH10f Merger Hubs.Network Mode IndicatorThe mode LED lights to display the current network mode, which can beset to Auto or Manual at the network’s Control Master. When the Pro64network is operating in Auto Mode, the red Auto LED will be lit. In AutoMode, no user settings are available on the MH10/MH10f; all ten A-Netports function identically. It does not matter which rear-panel A-Netport is used when connecting Pro64 devices to the network.One network mode is always selected. Here, the network is in AutoMode; the Auto LED is lit.In Manual Mode, the user has the option of directing A-Net data to eitheror both A-Net ports on input modules that are part of the network. Oncethe network has been set to operate in Manual Mode, the red ManualLED and one of the yellow configuration LEDs will be lit on the MH10/MH10f.By choosing one of the three Manual Mode configurations, A-Net digitalstreams can be routed in different ways to accomplish a variety of audiodistribution tasks. (One configuration is always selected by default.)Three Manual Mode configurations are available:A M erge A ll — Merges all incoming A-Net data anddistributes this merged stream of data to all 10 ports(this is the same as Auto Mode).B M erge 1-9 — Merges incoming A-Net data fromports 1-9 to a single stream and distributes this mergedPro64 stream to port 10 only.Pro64 data streams arriving at port 10 are distributed•• |
Related manuals for Aviom MH10
manualsdatabase
Your AI-powered manual search engine