6-306.1.16 Removing the Ultrasonic Transmitter from the Upper Base1. Remove the CCD Assembly as described in the preceding section 6.1.15.2. Remove the fixing screw on the ultrasonic transmitter, as indicated below:(Torque：6±0.5Kgf.cm / Screw Type: M3x8 / PN: 077-8023-0)3. Disconnect the cable from the ultrasonic transmitter to remove the ultrasonic transmitter, asindicated below: (Tip: Unlock the black cable connector switch, and remove the cable.)Reassembling:While connecting the cable of the ultrasonic transmitter, please refer to the cable connectiondrawing described in the preceding section 3.2.2.UltrasonicTransmitter
