Avision FF-1301S User Manual
Also see for FF-1301S: User manual
                                             | |
Contents
| 
5.2 Error ConditionsIf there is error during scanning, the LED light will be flashing in red color and error codeswill be displayed. Refer to the following table to clear the error conditions.ErrorCode/MeaningCause How to restoreE03Storage errorStorage is full; can not saveimage to storage device.Storage device not recognized.Free more space or insert a newSD card.Format your storage device.E04Paper jam1. Original has become stuck inthe feeder.2. Original exceeds max. length[300 dpi: 36” (914mm), 600dpi: 14” (356mm)]Open the feeder cover and pullthe original out of the feeder.E05No image scannedNo scan data detected. Wait until error disappears.E06Cover opensFeeder cover opens. Close the feeder cover.E08Low batteryBattery power getting low. Recharge the battery.E19Calibration FailsInternal check failed and foundcalibration data errorRecalibrate the scanner (see the“Calibrate Scanner” section.* Warning:If "low battery" is indicated on the LCD display, it is recommended to recharge the battery toprevent possible incomplete scanned images or other operational problems.5-2 |
Related manuals for Avision FF-1301S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine