253. Configuring the MachineThis product is designed to be ready to use with the default settings. However, ifdesired, you can change the settings to meet your specific needs. To change thedefault settings, press the “menu” button on the control panel. The menuinformation will be displayed. The information helps you to make various settingsthat fit your needs.The Navigation ButtonsTo navigate the menu items, the Set, Left-arrow, Right-arrow, and Back buttonsare provided on the control panel. You can adjust settings (e.g. set the paper size forTray 1) or view information (e.g. IP address, firmware version).Typical steps in using the menus are as follows:1. Press the Menu button to access the menu.2. Enter menu mode by pressing either the Set button or the Left-arrow orRight-arrow button and press the latter two repeatedly until the desired menuis highlighted in the displayed list.3. Press the Set button to select this menu.4. Press the Left-arrow or right-arrow buttons repeatedly until the desired item ishighlighted.5. Press the Set button to select this item. The LCD shows “Settings OK” on thebottom line.6. Press the Stop/Cancel button to leave the menu item.
